 |
|
|
|
|
Piccoboard w/o Receiver
|
|
|
|
|
|
For the Piccolo
|
|
|
|
The Piccoboard is the revolutionary electronic device that made the Piccolo a dream come true. This micro electronic device includes a BEC ESC and Gyro. Optional parts include a receiver and heading hold module. |
|
|
|
- The Piccoboard is available in four versions:
- 1. Basic Piccoboard: Includes the Gyro Electronic Speed Controller (ESC) BEC. A separate receiver must be installed. A Heading Hold module can not be added.
- 2. Basic + HH: Same as the Basic Piccoboard but with an optional adapter to connect the Heading Hold module. The Heading Hold module is sold separately.
- 3. Basic + HH + Receiver: Same as the basic Piccoboard but with an optional adapter to connect the Heading Hold module. The Heading Hold module is sold separately. Also included is a 6 Channel receiver with shift control (will operate with both JR / Airtronics or Hitec / Futaba transmitters
- selected using a jumper switch). Crystal (Berg) for receiver sold separately
- 4. Piccoboard Pro: The most advance version of the Piccoboard. Includes all of the above features as well as a higher amperage rating to deal with larger motors such as the 410 Power House and others. Also with this version the Heading Hold module is included as a standard feature. A perfect choice for anyone interested in the Piccolo Pro 3D.
|
|
|
|
|
|
|
|
|
|
|
|
Thunderbird 5300 Brushless Speed Control, 54 amps
|
|
|
|
|
|
15V, 3S LiPo, 10 NiCd/NiMH
|
|
|
|
This is the Thunderbird 54 Brushless Aircraft Speed Control. FEATURES: Easy to use. Advanced automatic software features. Rugged Surface Mount Technology hardware. Simplified programming steps. Auto-LiPo and No Brake for 3D action right from the package. Universal Rx connector. Programmimg features: Brake ON/OFF. LiPo, NiMH, NiCd and cutoff. Motor reversing. One year warranty. |
|
|
|
- Specifications:
- Max amps: 54A Max
- volts: 15V, 3S LiPo, 10 NiCd/NiMH
- BEC: Linear regulator, 3A max
- Length: 2 inch (51mm)
- Width: 1.15 inch (29mm)
- Height: .04 inch (10mm)
- Weight: 1.2oz (34g)
- Brake: ON/OFF
|
|
|
|
|
|
|
|
|
|
|
|
Align RCE-G600 Governor
|
|
|
FEATURES: Compact design, easy use, simple setting with great speed control performance. Speed resolution: 0.1RPM. Speed stability accuracy: within 1%(Steady State). |
|
|
|
- Specifications:
- Operating voltage:DC4.5V-6V
- Consumption current:<20mA@4.8V
- Direct detection of engine rotation speed.
- Speed control range:10500~21000RPM
- Servo RWM output pulse width: 1~2ms
- Operating temperature range:-20 degC~85 degC
- Operating moisture range:0%~95%
- Case size(body):28.5x26.2x9mm
- Signal wire length:160mm
- Sensor wire length:250mm
- Weight:10g(including wires)
- Accessories:
- RPM Magnet x 2(F4x1.5mm)
- Socket button head screw x 2(T2.6x6mm)
- Nut x 1
|
|
|
|
|
|
|
|
|
|
|
|
Trex 600 External BEC
|
|
|
|
|
|
Instructions included
|
|
|
|
The BEC was designed around the T-Rex 600 but can be used with any Heli. Using linear design and input power of 2 cell Li-ion or Li-poly battery this BEC features no interference to receiver and constant voltage to your electrical system. The kit comes with a 5.1V step-down voltage regulator**, allowing use of Futaba servo models 9241.9251.9253.9254.9255.9256, and other digital servos not capable of handling 6V. Connect the regulator inline between the Gyro and the rudder servo. If you are using a servo that can accept 6V input, the regulator is not required. Features power switch and voltage indicating light for battery status, to remind users to avoid over discharge the receivers battery and out of control caused by low voltage.
**Please note, the 6A BEC does not come with an external regulator.
** |
|
|
|
- Input voltage: DC 7.4V 2CELL Lithium battery
- Output voltage: DC 5.8V
- Max. continuous current: 3A for RCE-B3X, 6A for RCE-B6X
- Size: RCE-B3X 60x25x6mm / RCE-B6X 60x34x15mm
- Weight: RCE-B3X 15g, RCE-B6X 31g (including wire set)
- 5.1V step
|
|
|
|
|
|
|
|
|
|
|
|
Lexors H40 Brushless Heli Controller 40A
|
|
|
|
|
|
Comes with a special Lithium Mode
|
|
| | |
