Mount your Helicopter while performing regular maintenance and repairs tilt to the best angle for working while easily pivoting the entire helicopter with a quick pivot adjustments for added flexibility. Machined skid clamps and blocks are adjustable for full size Electric Helis as well .30 and .60 size Helis. The stand is supplied with a steel base and rubber table tray to hold your tools and catch small parts which may fall while you are working on your radio controlled Helicopter.

Don't risk destroying your engine when building it for the first time or when reassembling it. Make sure you take out your glow plug and screw on the piston locking tool to prevent the piston from moving while locking the main engine's shaft.

Sturdy plastic base with compartments to store decals, glue bottles, and paint bottles. Three brush supports give you a place to set your brushes without getting paint on your table. Pivoting arm with magnifying lens and powerful 6 white LED lamp for working on those fine details. Base has a slot to house a 9x12 cutting mat. Light is powered by four D size batteries.

Having a hard time getting the one way bearing out of a destroyed main gear. Well the CanoMod One Way Bearing removal tool is here to help. Simply position the upper cap onto of the one way bearing and the lower cap just below it and hammer the old one way bearing out. RC Helis are great, but even better when you have the right tools.

The 4 way cross wrench is very useful when installing and removing glow plugs. In addition the cross tool has 4 commonly used socket sizes including a 8mm 9mm 10mm and a 12mm which often come very handy. This chrome plated tool has a glow plug holder built in and the glow plug socket is extended so you may easily reach glow plugs which are buried deep within the engine's head assembly. Two version available including short armed ( easier to store in your tool box ) and long arm ( better reach to deep mounted engines ).

Convenient wrench tool to install and remove glow plugs. Comes with two sizes of sockets in common glow plug sizes. The solution for those hard to reach glow plugs or for those glow plugs that seem to be stuck and will just not come out. 2 Wrenches included in this kit..

Are you tired of your Helicopter's head / flybar moving while you are trying to fix or adjust your setup ? Well this is the quick nifty tool for you. The Flybar / boom locking tool mounts to any standard full size Heli boom. The upper portion of the tool mounts to any 3mm / 4mm flybar and prevents the head from pivoting or spinning while your are working on your Heli. The tool comes with an instruction manual as well as assembly illustration.

Another version of the Piston Locking tool. Protect your Piston during assembly by locking the piston in place. This allows for a much easier installation cleaning and disassembly of engine. The Locking tool is anodized Purple.

Durable plastic tip to protect your engines piston.

Tube bender is the perfect tool for making perfect bends. For example use it when making your own skids bending the tip of each skid. Available in both a 1/8 inch as well as 5/32 inch. The tube bender is easy to use simply insert your stock tube and push each lever to produce a bend.

The extra hand you always need and just don't have. This tool comes especialyy handy when soldering since it will hold wired and connectors in place using the heavy base so you can get a perfect soldering job. It is also very usfull when filing and doing lots of small jobs such as gluing and sanding as the job in question will stay put while you get the job done with the helping hand.

Do you need a helping hand ? Well the Multi angled vice is just that !!! The ball joint allows modelers to rotate their hobby project a full 360 deg and lock it at any angle for convenience and easier access. Opening to a maximum of 2 inches the 3 inch wide jaws feature removable rubber jaw covers for protecting delicate finishes. The large C-clamp mount attaches to work surfaces up to 2 inches thick a rubber base pad protects the mounting surface. Made of heavy cast aluminum with an enamel-coated body and cold rolled steel screws. Its one of those tools that once you have it you will wonder how you ever managed without it ...

Great for making holes in servo horns Makes non-tapered holes for a perfect fit.

The handle is 11 inches long. The bender is made of heavy steel and will make sharp bends and coils in 1/8 and 5/32 inch music wire for landing gears nose gears struts skids and much more. What makes the Best wire bender better than others is the wire clamp. This clamp prevents the wire from creeping forward as a bend or twist is made. Very handy tool.

Black-anodized metal tool with standard glow plug threads locks crankshaft in place without requiring carb or backplate removal. Simple to use - glow plug threads out Crankshaft Lock threads in to hold piston and crankshaft while removing clutch.

Use this tool to make perfect holes in bodies and canopies. The tool comes with CNC level markings which make it very easy to get accurate hole openings. Comes with easy grip and made to last.

This compact align tool comes with 3 drill bits and it is perfect to make quick small holes. Use for canopies, body sets and other applications which need a quick hole made. Replaceable drill bit with easy grip.

You will need all the help you can get the remove bearings from an engine. This tool can remove them. Made from 45C steel and a built in sliding hammer which will allow you to kick the bearings out of its housing in a matter of minutes.

One of the challenges in setting up the R/C Heli is keeping the Swashplate in a true balance parallel to the ground while setting up linkages and the flybar. This Swashplate alignment tools does just that. It uses a powerful magnet to hold the Swashplate leveled against the main shaft while working on it.

Removing the fan hub flywheel can be quite challenging as the part tightens with usage and may seem to be un-removable. This kit will allow to easily apply pressure without damaging the fan hub flywheel and to gently remove it from your Helicopter. The kit comes with instructions and the puller hub is anodized red.

Stainless steel curved scissors for cutting ABS plastic canopies Lexan helicopter and car bodies. Available from two different manufacturers including Hobbico and Max.

The Wiha Magnetizer / Demagnetizer is used to magnetize and demagnetize steel screwdriver blades power bits tweezers and similar tools. To magnetize lead tool slowly through lower square opening (+) to demagnetize guide tool slowly through upper opening (-). Shatterproof green plastic box. This is a hard to find and very usfull tool to have.