Ergonomically designed for optimal hand grip to prevent slippage, light weight, and easy to assemble and disassemble for transport ease. Suitable for fixed wing airplanes or helicopters, engine can be started with a simple one hand press on the button.

Suitable for up to 50cc gasoline engine or 300 class nitro engine. Designed for use with a 3S1P 1900~2300mAh/16c lipo battery. Fully charged battery is capable of 500 starts and beyond. Battery packs are charged with any T-REX 450 battery chargers. Starting adaptor includes double one way bearing design. High efficiency motor providing high starting power, and low reacting force. LED battery voltage indicator and over-discharge protection circuitry. Battery under voltage protection, Overheating protection and Protection against stalling by flooded torque overloading engine.

This is a Remote Glow adapter for Nitro Glow heli engines. You mount the remote glow to the side of your heli where you may access the glow ignitor with your canopy on. Then run the secure connector to your glow plug. As simple as that you can now start your helicopter with the canopy on!

The mother of all starters. This one will just not give up. Get the largest motor started at no time. With high torque of 1.15+ CID this one will start them all. If high torque is what you are looking for the PM-120 or PM-180 Supers will definitely fulfill your hobby needs. Alligator clips are included with heavy gauge wire so connect to your 12V power source and start your starter.

Notes from Manufacturer:
With a slighter hotter heat range than the OS #8 plug, the OS #7 Glow Plug is newly developed to run better at low and medium speeds. Ideal for helicopter engines with superior performance around hovering RPM range-critical for smooth and powerful 3D and F3C type flight. Also great all around plug for most 2-stroke airplane, helicopter and car (except turbo head) engines.

Notes from HeliHobby Team:
For 15% nitro this plug may be a better choice then the OS #8. For 30% the OS #8 is still the ideal choice.

Everything you need in an affordable starter pack. If you are just entering the amazing hobby of Nitro / glow R/C Helis and not sure what you need to get started well this affordable pack is for you ... The kit includes a range of accessories including Mini Starter w/CN0426 MPI Hand Pump w/Accessories Anderson Ni-Starter Maxx 12V 500mAH Charger 12V Dry Cell Starter Battery #8 R/C Benson Heli Glow Plugand of course a remote Glow Adapter.

Perfect starter for most smaller engines such as the .30+ power house engines. This one is probably the most commonly used starter available in the market.

This is the Duratrax Starter Box Power Pack. This power pack is a convenient source of power for starter boxes ( especially the Super Starter Pack ). Includes an AC wall charger with charge wire and male (Kyosho-type) connector as well as two 1500mAh 7.2V 6 cell flat battery packs with Tamiya type connectors Charging time is two to three hours.

Spring loaded design locks securely onto glow plug and works with both 2 and 4 cycle engines. Rechargeable for hundreds of times the extra long glow plug can reach hard to access engines and makes it ideal for Nitro Heli use.

This glow start comes with a built in glow plug tester. That's right now you can test the quality of your glow plug without having to take it out. Fly with the confidence your engine won't quit on you since you can now regularly test it. Its a very useful gadget to have..

A serious starter from a serious company. The Hanger 9 12V power started is available in two versions Lite duty and heavy duty. The starters come with alligator clips so it is very convenient to hook to any gel cell or 12V power source. Lite version designed to .30 size and heavy weight is designed around .60 size and up R/C Helis.

Very convenient and compact glow adapter. Three versions available 1. NiCD with charger 2. NiCD with no charger 3. Standard C Alkaline Powered. Includes a meter so you know exactly how much power is left in your favorite glow adapter.

Very convenient and compact glow adapter. Comes with charger ans with a long lasting NiCD Sanoyo pack. Includes a meter so you know exactly how much power is left in your favorite glow adapter.

The Mighty Midget Igniter is so small and compact it is the most conviniant to caryr around when walking toeqrds your model ( usually when needing to restart the engine ). It includes wall charger Locks onto glow plugs and small and powerful. 3 inch long total length with a shaft length of 1 inch. Just the right size to throw into a shirt pocket. 1000 mAh 4/5 Sub C Cell.

Get to hard to reach places with this extra long glow adapter. Powered by a NiCad long life sanyo pack with a meter so you know when you need to recharge. Some of the special features include an extended 3 3/4 shaft durable anodized case contoured comfort grip and spring loaded finger clip.

Make engine starting more convenient simple and safe - give your 12V electric starter its own portable rechargeable power supply! Hobbico's affordable PowerCore MKII sets you free from field batteries and confining cords...and supplies enough oomph to start 2-stroke .90 cu in and 4-stroke 1.20 cu in engines.

Power your glow directly from a Gel cell or car battery. Easy and convenient. Comes ready with banana plugs to be used with your power source. Designed to fit any standard glow plug this chrome-plated plug socket locks in place with just a press without pushing or twisting.

Because it gets its cranking power from a replaceable C cell alkaline battery this Glo-Starter offers higher voltage than a NiCd and at a lower price. It delivers 1.5V of power for lots of starts at the flying field and unlike NiCds the alkaline cell never needs to be charged overnight beforehand a real convenience feature for impulsive Helicopter R/C modelers.

Glow plug with charger combo. Charge your glow plug at home and come ready to the field. A combo that brings together the proven power of Sanyo the #1 name in NiCds with the Twist-and-Lock connector. The glow starter is available in both standard and extra long version. The extra long may reach engines deep inside the Helicopter !!!

The Heli Super Start is the fast and very convenient way to start Heli engines up to .90 cubic inch. A rocker switch on top with safety guard and a push button below the handle offer versatility for starting different helicopter designs. Dual 540 motors and 7.2V battery packs generate plenty of starting power a steel gear drive and ball bearings make for smooth operation. (Battery packs not included.) Includes a starter cone with rubber insert. A one-way starter shaft (not included) is required for some Helicopter models ( Look into our KSJ Start shaft and others. ) This cool starter also features two start switches for using in either horizontal or vertical positions so it is very versatile. Also check out DTXP4600 below which is the battery starter pack for the Super Starter.

This HeliMax starter wand comes complete with a one way bearing and a hardened hex tip. The hex starter one way insures the engine can continue and spin free of the starter once it ignites. This makes the starting process much easier for both you and your engine. The starter hex wand is blue anodized and will fit all common starters.