 |
|
|
|
|
Super Hot-Shot 2 Glow Start
|
|
|
|
|
|
Start it quick. Bright glow
|
|
|
|
This is the Super Hot-Shot #2 Standard Glo-Starter with Battery Charger. Used for heating glow plugs to start glow-powered engines. FEATURES: Proven Twist and Lock Connector ensures a secure, solid connection that won't come off, providing safer, faster starts for your model. Pre-Installed Genuine Sanyo 5000mAh battery cell. Included AC battery charger with hex-shaped charge end recharges the glow starter in 10 hours. A red LED glows as unit is charging. Removable red rubber socket cap prevents shorting and any dirt or dust debris from entering into the the shaft. One Year Limited Warranty USA and Canada only. |
|
|
|
- INCLUDES: One Super Hot Shot 2 Standard Glo-Starter w/red rubber protective cap
- One Hot Shot #2 Glo-Starter Battery Charger
- One Instruction/Header Card
- SPECS: Sanyo NiCd Battery: 5000mAh 1.2V
- AC Charger: Input: 110-120V AC 60Hz (US Standard)
- Output: 1.25V DC 500mA
- Hot Shot: Overall Length: 4-5/8 inch (118mm) Shaft Length: 2-1/4 inch (57mm)
- Diameter: 1-5/16 inch (33mm)
- The proven Twist-and-Lock Connector ensures:
- A solid, secure connection
- Safer starts
- Faster starts
- Long-lasting reliability
|
|
|
|
|
|
|
|
|
|
|
|
M009 Head Lock Mk III
|
|
|
|
|
|
With extended cable
|
|
|
|
Model Products Head Lock Glow Starting Clip. FEATURES: Has a locking style glow plug clip. It is pushed on the glow plug and is twisted clockwise to lock on. Has positive spring contact that will not come off from engine vibration. The only way to disconnect this from the glow plug is to twist it, counterclockwise. Protective plastic cap helps keep the unit clean and prevent shorts. |
|
|
|
- INCLUDES:
- One Head Lock with 30 inch Wire Lead
- One Protective Plastic Cap
- REQUIRES: Banana Plugs or Alligator Clips to attach to Glow Plug power source.
|
|
|
|
|
|
|
|
|
|
|
|
SwitchGlo Remote Igniter
|
|
|
|
|
|
The smarter way to glow.
|
|
|
|
SwitchGlo needs no additional batteries and it is very easy to use. From your transmitter, just toggle your glow on and off, at start-up and in-flight. SwitchGlo uses new low power technologies, programmable integrated circuits, and custom software code to efficiently light your glow plug directly from the power it sees while plugged into your receiver. SwitchGlo plugs into an available receiver channel, then to your glow plug. Simply assign a transmitter toggle switch to this channel, and toggle your glow on and off. That's it! The audible alert will sound while the glow plug is glowing. Plus, you can mix program SwitchGlo just as you can mix program any servo on your craft allowing you to utilize your glow in ways you never thought possible! FULLY MIX PROGRAMMABLE! . . . . . USE YOUR GLOW WISELY! Eliminate HOT STARTS by disabling your SwitchGlo switch on idle-up. Flip on SwitchGlo when bogging out before flight to avoid the Walk of Shame. Flip on SwitchGlo during autorotations to reduce engine load-up and flooding. Mix SwitchGlo to turn on at any throttle setting for landings. |
|
|
|
- Transmitter Controlled. toggle glow on/off at start-up and in-flight
- Powered by existing onboard battery from 4.8 to 7.2 V
- Extremely low power consumption. 2.2mah per 5 second pull
- Throttle Programmable with mixable radios
- Audible Alert indicates glow, and
- helpful locating downed aircraft 10 second automatic glow shut-off safeguard
- Works with all types of Radios and Nitro R/C Crafts
- Easy Installation, Lightweight, Durable, Maintenance Free
|
|
|
|
|
|
|
|
|
|
|
|
M037 Head Lock Professional
|
|
|
|
|
|
With extended cable
|
|
|
|
Model Products Head Lock Professional Glow Plug Heating Clip. FEATURES: Has a locking style glow plug clip. It is pushed on the glow plug and is twisted clockwise to lock on. Has positive spring contact that will not come off from engine vibration. The only way to disconnect this from the glow plug is to twist it, counterclockwise. Protective plastic cap helps keep the unit clean and prevent shorts. |
|
|
|
- INCLUDES:
- One Head Lock with 48 inch Wire Lead
- One Protective Plastic Cap
- REQUIRES: Banana Plugs or Alligator Clips to attach to Glow Plug power source.
|
|
|
|
|
|
|
|
|
|
|
|
Glow Plug Lock Socket (Long)
|
|
|
|
|
|
For all glow Helis
|
|
|
|
Features spring-loaded chuck to insure lock-on grip and color-coded alligator clips.
|
| | |
