This is a highly detailed, Pre-painted plastic Bell 222 / Airwolf Scale Fuselage Kit. These come just like it shows in the pictures below. All duct fans are pre installed and Air brushed with a faded burns, All air ducts are covered with meshed nets and the detail is superb. Also, the front canopy mounts using the supplied magnets so installing and removing the front canopy is a snap. And yes, all the retract system comes pre installed and ready to be used. The lower retract wheel system seats on a fiberglass CNC plate, this is one quality products. Fits the T-Rex 450 and similar sized 400 to 500 mini Helis. Includes fins, windshield and a retractable landing gear kit. Built-in magnet clips provide an easy way to remove and install the front canopy. Choose from a Traditional Red/White or Black Airwolf paint scheme. Also available is a plain white/unassembled kit for those who want maximum customization.
Wheels not included, may use part GPMQ4241

Fusuno fuselages are one of the finest fuselages on the market with a lot of details attention paid on the body. The metal vent, the exhaust and all other details are carefully designed and manufactured to give best and realistic look for your model. Very high quality and light fiberglass material with very light weight retract system. The light fuselage comes factory pre-painted with all necessary hardware. It is very easy to assemble and only takes you a hour or twoto install this fuselage onto your helicopter. Hovering these Airwolfs will look just like the real thing and it will definitely make you stand out at the flying field. Available in Black or Red.

Fusuno fuselages are one of the finest fuselages on the market with a lot of details attention paid on the body. The metal vent, the exhaust and all other details are carefully designed and manufactured to give best and realistic look for your model. Very high quality and light fiberglass material with very light weight retract system. The FUSUNO fuselages are painted with highest quality automotive painting with double gel coat for UV and oil protection. The new RVS version comes with thousands of handmade rivets that makes the fuselage much stronger, bolded out and impressive. The RVS version also includes all painted signs suchs as NO STEP, DANGER to simulate real Airwolf design. The new version also added these improvements over the last version: Better retract system with retract servo holder included. New design painted exhaust looks more mean and simulates smoke. New design nose with different shape, adding stronger look for the fuselage. Wider body with pre-cut wingside. The light fuselage comes factory pre-painted with all necessary hardware. It is very easy to assemble and only takes you a hour or two to install this fuselage onto your helicopter. Hovering these Airwolfs will look just like the real thing and it will definitely make you stand out at the flying field. Choose from Black or Red.

FUSUNO fuselages are one of the finest fuselages on the market with a lot of details attention paid on the body. The metal vent, the exhaust and all other details are carefully designed and manufactured to give best and realistic look for your model. Very high quality and light fiberglass material with very light weight retract system. The FUSUNO fuselages are painted with highest quality automotive painting with double gel coat for UV and oil protection. This is the only fuselage on the market with lighting system. There are 10 LED lights pre-installed on the bodies of the fuselage. Red LEDs are installed on one side and Blue LEDS are installed on the other side for easy locating orientation of the heli in flight. Computer chip is installed and embeded into the fuselage. All wires are organized very well in the fuselage. All wires are connected and ready to fly with only one wire with JST connector for plugging into the AUX channel of the receiver. The new RVS version comes with thousands of handmade rivets that makes the fuselage much stronger, bolded out and impressive. The RVS version also includes all painted signs suchs as NO STEP, DANGER to simulate real airwolf design. The new version also added these improvements over the last version: Better retract system with retract servo holder included. New design painted exhaust looks more mean and simulate smoke. New design nose with different shape, adding stronger look for the fuselage. Wider body with pre-cut wingside. The light fuselage comes factory pre-painted with all necessary hardware. It is very easy to assemble and only takes you a hour or two to install this fuselage onto your helicopter. Hovering these airwolfs will look just like the real thing and it will definitely make you stand out at the flying field. Requires at least a 8CH receiver.

Great Planes Tailwheels are great for most tailwheel applications. The tire is mounted on a strong hub and uses axle wire. Available in 1-1/4, 3/4 and 1 inch.

●EC-135 scale fuselage use for ALIGN T-REX450 helicopter series.

Made from high impact Vac formed clear lexan and comes with instructions. Simply paint and install. Spary paint or airbrush from the inside or from the outside. These Fuselages will fit all versions of the T-Rex 450 ( both X and XL / Long ). High Quality and looks great. This is the easiest body to fit on the T-rex as it uses the stock skids and struts.

Make your Zoom 400 /TRex / MX 400 look like the real thing. Kit includes clear plastic body kit, assembly instructions, mounting hardware and finishing suggestions. Made from high impact Vac formed clear lexan. Simply paint and install. Spray paint or airbrush from the inside or from the outside. Pictured with the the optional retract kit. The retract kit is not mandatory and it can be built with skids.

Pre-Painted scale fuselage for the Align T-Rex 450X/XL/SE/SE V2, Dragonus II PRO and other 450 size helis. Built with true Glass Fiber. Higher quality compared to PC Plastics. Easy to disassemble for installing / removing batteries and making repairs.

Guns not included

●Suitable for ALIGN T-REX450 series.
●Movable radar.
●High detailed scare missile launching.
●Non screw canopy cover design which convenient for battery's maintenance.

●Suitable for T-REX450 Helicopter.
●Retractable functionality.
●Realistic military equipment refined version.
●Easy assembly, retractable landing gear with smart tow bar design, just needs a single DS410 servo is enough to tow 3 sets of landing gears.
●Non screw canopy cover design which convenient for battery's maintenance.

Suitable for T-REX450 Helicopter. Retractable functionality. Realistic military equipment refined version. Easy assembly, retractable landing gear with smart towbar design, just needs a single DS410 servo is enough to tow 3 sets of landing gears. Non screw canopy cover design which convenient for battery's maintenance.

●Suitable for T-REX450 Helicopter.
●Retractable functionality.
●Realistic military equipment refined version.
●Easy assembly, retractable landing gear with smart towbar design, just needs a single DS410 servo is enough to tow 3 sets of landing gears.
●Non screw canopy cover design which convenient for battery's maintenance.

AGUSTA A-109 FRP scale fuselage use for ALIGN T-REX450X/XL/SE/SE V2

EC-135 FRP Scale Fuselage use for ALIGN T-REX450X/XL/SE/SE V2

Transform your mini Titan E325 with our Thunder Tiger's AH-1W Super Cobra Gunship scale fuselage. Its light PVC body, high- positioned tail rotor mechanism, missiles and machine guns will give your mini Titan the look of one of the finest attack helicopters in U.S. history. Very easy to assemble and only takes you a few hours of installation to put this scale body on your E325. Hovering these AH-1W Super Cobra Gunship will look just like the real thing an it will definitely make you stand out at the flying field.

Darth's Helibodies are made from lexan or PETG and come in two halves and require paint and assembly. They are high quality bodies for you to customize any way you want. Some minor modifications may be needed for certain models.

Darth's Helibodies are made from lexan or PETG and come in two halves and require paint and assembly. They are high quality bodies for you to customize any way you want. Some minor modifications may be needed for certain models.

Darth's Helibodies are made from lexan or PETG and come in two halves and require paint and assembly. They are high quality bodies for you to customize any way you want. Some minor modifications may be needed for certain models.