This is the pitch gauge for the Align Trex 450 3G Flybarles Head. You will use the screw to bolt this to the top of your head in order to check your pitch.
Note: There is a pitch gauge specifically for the Trex 450 Pro. Do not use this for the Trex 450 Pro.
- Pitch Gauge x 1
- Socket button head screw(M2x6mm) x 1
Main Blades Holder for 450
Main blade holder for RJX Trex 450 Pro Flybarless head.
450FL Mixing base assembly/Black H45113QA
Use for T-REX450 PRO 3G Programmable Flybarless System
- Washer x 2
- Radius arm x 2
- 681ZZ Bearing x 4
- FMR52ZZ Bearing x 4
- 450FL Metal Washout Base x 1
- 450FL Metal control arm x 2
- Socket button head screw(0#Ã4mm) x 4
- Socket button head screw(M2x12) x 1
- Socket button head screw(M2x8) x 1
450 PRO FL Main Rotor Holder Set/Black H45118
Use for T-REX450 PRO 3G Programmable Flybarless System
- 450FL Metal Main Rotor Holder x 2
- MR74ZZ Bearing x 4
- MR84ZZ Bearing x 4
- Linkage Ball A(M2.5x2.5) x 2
- Socket Button Head Collar Screw(M3x14mm) x 2
- Locking nut(M3) x 2
450FL Linkage rod(A) set H45116
Use for T-REX 450 3G Programmable Flybarless System
- Arm F x 2
- Ball Link x 4
450FL Linkage Ball H45115
Use for 450 3G Programmable Flybarless System.
- Linkage Ball A(M2.5x2.5) x 2
450 PRO Pitch Gauge H45119
This is the pitch gauge for the Align Trex 450 PRO Flybarles Head. You will use the screw to bolt this to the top of your head in order to check your pitch.
- Pitch Gauge x 1
- Socket button head screw(M2x5mm) x 1
450 PRO FL Main Rotor Housing Set/Black H45117
Use for T-REX450 PRO 3G Programmable Flybarless System
- 450FL Metal Main Rotor Housing x 1
- Damper Rubber x 1
- collar x 2
- Socket Button Head Collar Screw(M2.5x16mm) x 1
- Hex screw nut(M2) x 1
Copper washer 5x8x.02 x 10 pcs
These are the copper washers in the RJX 450 Pro Flybarless Head
450FL Main Rotor Holder Set/Blue H45112
Use for T-REX450 3G Programmable Flybarless System
- 450FL Metal Main Rotor Holder x 2
- MR74ZZ Bearing x 4
- MR84ZZ Bearing x 4
- Linkage Ball A(M2.5x2.5) x 2
- Socket Button Head Collar Screw(M3x14mm) x 2
- Locking nut(M3) x 2
450FL Mixing base assembly/Blue H45113
Use for T-REX450 3G Programmable Flybarless System.
- Washer x 2
- Radius arm x 2
- 681ZZ Bearing x 4
- FMR52ZZ Bearing x 4
- 450FL Metal Washout Base x 1
- 450FL Metal control arm x 2
- Socket button head screw(0#Ã4mm) x 4
- Socket button head screw(M2x12) x 1
- Socket button head screw(M2x8) x 1
RJX Flybarless Head - Trust Bearing 3X8X3.5
These thrust bearings are for the RJX flybarless head for the Trex 450 PRO.
450FL Main Rotor Housing Set/Blue H45111
Use for Use for T-REX450 3G Programmable Flybarless System.
- 450FL Metal Main Rotor Housing x 1
- Damper Rubber x 1
- collar x 2
- Socket Button Head Collar Screw(M2.5x16mm) x 1
- Hex screw nut(M2) x 1
450 head stopper
This head stopper is a replacement for the RJX flybarless head system. It may prove useful in other applications as well.
3mm nut +3x16 screw for main blades holder
Blade screws for RJX 450 Pro Flybarless head.
Swashlocker arm link with pin x2 for all helis
This is the RJX swash locker arm
Center Hub
This is the center hub for the RJX Trex 450 Pro Flybarless head.
Bearing 4X8X3 for main blades holder x4 pcs
These 4 x 8 x 3 mm bearing are for the RJX 450 Pro Flybarless head (Blade grips)
Align Trex 450 PRO Series Flybarless Anti-Rotation Bracket
Direct Part Replacement
The Flybarless Anti-Rotation Bracket design utilizes high-end CNC machining to produce tight and accurate tolerances throughout the part, giving you the highest-level of flight control and accuracy available today. The design incorporates an integrated flybarless electronics mount, providing an extremely stable mount for the precision electronics required for 3D flight. With an extended platform perpendicular to the main shaft, the new upgrade provides perfect alignment to the helicopter for precision 3-axis control of the helicopter by any flybarless system.
- For models: all ALIGN TREX 450 PRO versions (replaces stock Align part #H45031)
- Includes:
- One (1) TREX 450 PRO Aluminum Flybarless Anti-Rotation Bracket
- Two (2) M2.5 x 0.45 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Finish: Clear anodize, mirror-polish CNC gloss
- Weight: 14 g (design is FEA optimized for maximum strength and minimum weight)
Products > Flybarless Heads and Parts (See Flybarless Electronics
HeliHobby.com is your source for Remote Control RC Helicopters, products, modifications and more. Full Range of Nitro, Electric and Micro Helis in stock
