This fully all CNC metal tail gear box system was designed to work with Belt Drive conversion system. With superior features like all ABEC-5 ball bearings, CNC tail pitch slider and precision tail shaft the system reduces unwanted slop and binding. The tail pitch slider comes with dual hinges on both ends to allow super smooth and bind free operation under any load. All parts are CNC with aluminum 7075 for highest strength possible. It is also anodized with pleasant blue color. With this new tail pro, installation is a breeze and performance is a given.

The 3DX-UGE-05 Precision CNC Swashplate is the center and one of the most important parts of the heli. This CNC version brings best precision and eliminates all the play and flex in the stock plastic swashplate. All the balls are precision metal machined for long lasting and fit perfectly in the ball links. With this must have upgrade your Blade CP / Honeybee CP2 will be a much more stable machine.

This fully all CNC metal tail gear box system was designed to work with Belt Drive conversion system. With superior features like all ABEC-5 ball bearings, CNC tail pitch slider and precision tail shaft the system reduces unwanted slop and binding. The tail pitch slider comes with dual hinges on both ends to allow super smooth and bind free operation under any load. All parts are CNC with aluminum 7075 for highest strength possible. It is also anodized with pleasant blue color. With this new tail pro, installation is a breeze and performance is a given.

These Blade CP / Honey Bee CP2 Metal Upper Mixing Arms can be used as a direct replacement or as an OEM replacement part for the all CNC head. The arms are super stiff and come pre installed with precision ball ends. Free of jitter and flex these all aluminum arms are definitely worth having.

Use these Blade CP / Honey Bee CP2 Metal Outer Push Rod connecting rods with the HDX300 after market swashplate. The connecting rods effect collective control as they link the upper swashplate to the lower head system. A more responsive CP makes for a better all around 3D radio controlled Helicopter.

The multi purpose boom clamp for the Zoom / Shogun / Zap is perfect to mount your vertical fins horizontal fins and even to make a Gyro mount plate. The clamp comes with socket head screws and it is a snug fit on the stock boom as well as on the Carbon fiber and Platinum booms. Anodized blue to match the other boom parts.

xxx

This multi purpose boom clamp includes a tail push rod support Horizontal fin support and boom support all in one convenient light weight clamp. The clamp comes with side ball links and matching brass balls and it is a great upgrade.

The Aluminum CNC Tail Twin Motor Mount is designed to serve as dual motor housing for E-FLITE Blade CP. The Blade CP tail motor has very short working lifespan and easy to burn after a short period of time. The purpose of the twin motor mount is to split the current load on Blade CP tail motor into both tail motors thus can prolong the life of the tail motors. The Aluminum CNC Tail Twin Motor also utilizes double high quality flange bearings to support the tail shaft and brings super smoothness to the tail of the Blade CP. Although the part was designed for the Blade CP it may easily fit other Micro Helis such as the FP Hummingbird, Piccolo, Honey Bee and others.

The Vertical Tail Fin is machined from Carbon Fiber material, very light, strong and stylish. It is designed to protect tail rotor and tail motor during landing. Vertical Tail Fin is made with 1.50mm thickness Carbon Fiber sheet to minimize Tail Fin vibration. Used to replace the stock vertical rod on EFLITE Blade CP/CP2 and Honey Bee CP2 helicopters.

The upper head flybar system can be ordered as a standard upgrade or as a replacement part for the all complete CNC head system. The flybar system comes pre installed with precision ball ends. Have your blade CP / Honey Bee CP2 do what you tell it with no delay. Removes all flex and play which contributes to inaccuracy in flight control which is often evident with the stock plastic head system.

These pitch control linkages pack include all the linkages needed for the Blade CP / Honey Bee CP2 All-metal Head system. It includes quality ball links as well as 4 threaded rods and 8 plastic ball linkages (4.5mm ball size). A essential package need to have for HDX300 All-Metal Head as well.

These are replacement balls and screws for the Blade CP and Honey Bee CP2. The package includes 15 pcs of aluminum balls (3.5mm size for Blade CP and Honey Bee CP2) / 15 pcs of aluminum balls (4.5mm size for the HDX300-HS). These balls can be used on stock Blade CP, HDX300-HS and Honey Bee CP2. Quality precision screws.

Use this body cord to hook up your Helicopter's transmitter PS2 ( Small round ) port to hook up onto a friend which can help you learn how to fly. Best of all if you get into any flying trouble, your friend can easily take over with his transmitter and save the situation in no time.

Light Weight High Discharge Rate. More Power ( Faster Blade Speed ). More Control Over the Center of Gravity

The ducted fan system was first introduced with the ProNet and is now available for any dual motor ( Tail motor system ) Micro Heli. Use the low volt motor for standard NiMH or NiCD packs or the high voltage motor when using lithium packs. Pre wired motor and heat sink are included in this package.

These HDX300 Screw Bag for Head System are for the HoneyBee CP2/Blade CP Helis. Package comes complete with all screws and nuts needed to repair / replace parts in these Helis. Kit includes both the chrome and black hardened screws.

Get rid of your tail gear and hook up this buzzing prop directly to your tail motor. The propeller / tail rotor is about 1/2 the size of the original black tail rotor. The smaller size is compensated by the fact it is connected directly to the motor allowing for much higher RPM on your new direct drive tail rotor system. Higher RPM will allow for a more responsive tail system. Two versions of the props are available narrow and wide. The wide Prop will allow for more air to be pushed and so it will enhance tail responce time however the tail motor is required to work harder and so the tail motor does get hotter. The narrow version will allow for a cooler tail motor but you may notice tail control being a bit slower in responce time.