300-N/55 300 VS Rotary Tool Kit with 55 Accessories
Variable Speed, Corded
This is the Dremel 300 Series Variable Speed Rotary Tool Set. FEATURES: Variable speed from 5,000 to 35,000 rpm. Lightweight design for comfort during long use. Dove-tail feature for Dremel-exclusive attachments. On-board tool storage keeps your wrench close at hand. Click-and-set on/off switch allows prcise speed selection. Cool-running ball bearing construction for smooth and quiet operation. Replaceable motor brushes extend tool life (dremel #2615302695). Comfort grip housing for better tool control. Five year warranty. Includes Mid-Size Storage Case and 55 accessories listed below.
- INCLUDES: One 300 series variable speed rotary tool.
- One #106 engraving bit
- One DRE191 High speed cutter
- One DRE150 drill bit
- One DRE401 Mandrel
- One DRE402 Mandrel
- One DRE403 Brush wheel
- One DRE407 coarse 1/2 inch sanding drum
- Three DRE408 coarse 1/2 inch sanding band
- Twelve DRE412 medium sanding discs
- Five DRE414 small felt wheel
- One DRE415 dressing stone
- Four DRE420 heavy-duty emery cut-off wheel
- One DRE421 small polishing compound
- One DRE433 felt buff cone
- One DRE425 emery wheel
- Two DRE426 fiberglass cut-off wheel
- One DRE428 carbon steel brush
- One DRE429 large felt wheel
- One DRE430 coarse 1/4 inch sanding drum
- Three DRE431 1/4 inch sanding band
- Three DRE432 1/2 inch fine sanding band
- Three DRE438 1/4 inch sanding band
- One DRE481 3/32 inch collet
- One DRE511 medium buffing wheel
- One DRE7134 diamond point cutter
- One DRE83332 silicon oxide grinding stone
- One DRE85422 silicon oxide grinding stone
- One DRE932 aluminum oxide grinding stone
- One Dremel grey plastic storage case
- One collet wrench
- One quick start instruction book
- SPECS: Length: 7.5 inch (190mm)
- Diameter: 2.13 inch (54mm)
- Weight: 18oz (510g)
- Power cord length: 6' (1,828mm)
This is the Hand Held #750 Cordless Dremel Tool. FEATURES: Knurled collet (no wrench required), Two speeds (6500- 13000rpm), Shatter resistant housing, Removable/rechargable battery pack. 2-Year Warranty.
- INCLUDES:
- One Minimite tool
- One battery pack
- One charger
- One 428 wire brush
- One 150 drill bit
- One 407 drum sander
- One 432 sander band
- One 190 high speed cutter
- One instruction booklet
- SPECS: 4.8v DC battery
- Charge time: 3 Hrs
- Collet size: up to 1/8 inch
- Tool length: 6-1/2 inch
- REQUIRES: Light oil for lubrication. Eye protection
- COMMENTS: Can be used on a variety of materials in numerous applications.
Soldering iron 25W with Hot Knife Tip
High Quality tool made by Hobbico
Hobbico soldering irons feature fast heating high-quality mica heating units which provide thermal stability for long life. The soldering irons are availble in three versions 25W with a knife tip for very delicate soldering jobs ( such as when working on a Piccoboard ) as well as a standard tip in 30W and 60W. The lower wattage is designed for more delicate jobs while the stronger 60W will work well in application were heavy duty solder must be applied.
- U/L approved 110V input - Anti-roll handle is heat- and impact-resistant - ribbed design for fingertip control - Fast heating Soldering irons
HeliHobby.com is your source for Remote Control RC Helicopters, products, modifications and more. Full Range of Nitro, Electric and Micro Helis in stock
300 Series Manual.pdf
