Universal for all Micro Helis including Zoom / Shogun / Trex
Protect your main blades your boom blade grips and spindle from damage while carrying your favorite Micro Heli around with this solid foam blade holder. Designed to fit all Micro Helis including Shogun Zoom Trex Piccolo FP / CP Hummingbird FP / CP Hornet and all others. Uses two upper slots for the main blades and latches to the boom using dual circular holes for a perfect tight fit. Snaps on and off in seconds.
Blade-holder for Transport
All Midsize Elec and .30 .60 .90 Glow Helis
Eliminate strain on the rotor-head when the heli is idle. With individual slots to prevent blades from colliding.
Rotorblade Balancer
All Midsize Elec and .30 .60 .90 Glow Helis
With the rotor blade balancer you can balance the main blades. Simply mount the blades using the supplied screws and either hold at the grips or set tool on a flat surface to indicate balance state. Apply tape on lighter blade to achieve a perfect balance.
- Dimensions: 100mm length x 15mm width
Pitch Gauge
All Helis ( Designed around the ECO-8/16)
With this pitch Gauge you can set the angle of attack of your main rotor blades. Work with your TX settings to adjust proper degree settings. The kit also includes paddle arms to insure secure positioning of the stabilizing paddles during setup.
- Dimensions: 800mm length x 25mm width
Blade Balancers (main and tail) w/ Pitch Gauge set
All Helis. Designed around mid size such as Logo or ECO-8
The head tool kit includes 67597 63180 and 67680 a must have tool kit for any serious flyer's flight tool box.
Tailrotor Balancer
All Helis. Designed around mid size such as Logo or ECO-8
With the tail rotor blade balancer you can achieve a perfect tai with no shacking. Unscrew the grips insert the tail hub though the threaded rod lock using the grips and hold in your hands to measure weight differences. Also perfect to measure Micro Heli Flybarless heads.
- Dimensions: 50mm length x 10mm width
Pitch Gauge With Flybar Paddle Guage Set
All Midsize Elec and .30 .60 .90 Glow Helis
Main blades pitch gauge and Flybar paddles gauge set. The two most important tools needed to fix tracking and adjust pitch ranges available in an inexpensive matching set. Enables you +17 deg and -17 deg reading from basic to 3D pitch set up. Also available are the purple Flybar paddles by themselves. Get the complete kit or just the purple paddles.
- Parts are available in matching purple plastic set
Tool Combo pack for Basic Helicopter setup
All .30 or larger Helis
A basic set up tool kit: ball link pliers blade balancer and pitch gauge with paddle gauge. The inexpensive pack is a great money saver and includes all the basic tools one would need when setting up a .30 size or larger Radio Controlled Helicopter. The common tools are a must for proper setup and if you need them all this combo deal will save you money.
59.95
PART#CN2046B
- Kit includes Steel Ball Link Pliers as well as a steel blade balancer
Flybar Paddle Gauge V2
For full size Helis
Good paddles setup is like having good alignment in your car. The paddles are the steering wheel of the Helicopter and thus play an important role in good setup. Use these inexpensive paddles to setup your paddles.
17.95
PART#CN2050
- By Century Helicopters
- Spring loaded
- Simple to use
Accuratech Main Blade Balancer
All Helis ( Including Micros )
Another version of the blade balancer. This type works better for lighter blades such as Micro blades since it has a heavier base ( made of metal ) and so you can weigh very light blades on it even as light as the smallest micro wood blades. Also includes a C.G checking block.
22.95
PART#CN2052
- comes with mounting blade screws ( two sizes )
Universal Foam Blade Holder for Micro Helicopters
Specifically for Hummingbird Piccolo Hornet and others
Designed with a universal boom clamp this blade holder fits most Micro CP machines such as the Piccolo Pro Hummingbird Elite / Pro Blade CP E-Sky Hornet and others. The blade holder comes in blue and will help protect your blades from flapping around while you carry your favorite machine holding the rotor head.
2.10
PART#CNE330
.30 SIZE BLADE HOLDER
All Midsize Elec and .30 .60 .90 Glow Helis
Eliminate strain on the rotor-head when the heli is idle. With individual slots to prevent blades from colliding.
3.99
PART#HMXE1000
.60 SIZE BLADE HOLDER
All Midsize Elec and .60 .90 Glow Helis
Eliminate strain on the rotor-head when the heli is idle. With individual slots to prevent blades from colliding.
4.99
PART#HMXE1005
Rotor Blade Tracking Tape Roll
For All RC Helis. Any Size Heli.
Ideal for checking a heli rotor's tracking a critical adjustment in increasing performance and Heli flying enjoyment. Proper tracking reduces vibration and increases Heli control. Bright red vinyl tape provides a sharp contrast on white blades producing a red indicator that makes it easy to check to see that both blades are on the same plane.
2.49
PART#HMXE4710
- Tape is 1/2 inch (13mm) wide and comes in a convenient 36 foot (10.8 m) roll
Heli Pitch Gauge w/Pouch
All Midsize Elec and .30 .60 .90 Glow Helis
Proper adjustment of a heli's blade pitch results in smoother more consistent performance and helps decrease the risk of a costly crash. That's why every heli pilot needs the new Heli-Max Heli Pitch Gauge. It features a red anodized aluminum plate with durable injection-molded plastic parts and comes in an attractive reuseable vinyl pouch.
19.99
PART#HMXR4850
- Slide the gauge over the blade and clamp on - Set the positive and negative throws according to the manual's specs - Adjust the blades until the flybar is level with the gauge's straightedge
HeliMax Heli Blade Balancer
All Helis
This Inexpensive helicopter blade maintenance tool and balancer effectively minimizes Heli blade vibration to enhance performance. Ball bearing equipped axles allow the blade platform to move smoothly and easily. An adjustable weight ensures perfect level as measured by the bubble level. Determines the CG for a single blade — or use any of the included adapters (2.5 mm 3 mm 4 mm and 5 mm) to center two blades for balancing.
19.99
PART#HMXR4855
JR Pro Universal Pitch Gauge with Case
All Full Size Helis
Another high quality tool this one is from JR and it measures +/-15 degrees accurately. Complete with carrying case. Used by Pros and experience flyers alike the JR pitch gauge is essential for proper rotor setup.
28.99
PART#JRP960326
Universal Rotor Blade Balancer Mark II
All Helis
Another very cool and compact blade Balancer. Tracking and Balancing are the building blocks of any well configured Heli. This cool Balancer + Platform will balance any blades even Micro Heli blades can be balanced ( you will need to use some common Micro Heli spacers and screws which are not included to mount your Micro Blades to the balance platform ). A built in measurement scale will help you configure your blades so you can achieve a perfect balanced rotor disk system.
36.54
PART#KSJ1470
Universal blade balancer Platform
All Helis
Tracking and Balancing are the building blocks of any well configured Heli. This cool Balancer + Platform will balance any blades even Micro Heli blades can be balanced ( you will need to use some common Micro Heli spacers and screws which are not included to mount your Micro Blades to the balance platform ). A built in measurement scale will help you configure your blades so you can achieve a perfect balanced rotor disk system.
51.99
PART#KSJ528
- Use the blade tracking tape on the lighter blade to achieve a perfect balance so remember to order PART#KSJ836
Pitch gauge plate for KSJ624 paddle gauge set
Mid Size Helis
Another type of Pitch Gauge. This one is from KnS and it is and inexpensive tool that will do wonders to your collective mid size Heli.
15.99
PART#KSJ623
- For KSJ624 Paddle Set - Instruction included
Paddle gauge set plastic
All Midsize Elec and .30 .60 .90 Glow Helis
The paddles gauge are used to calibrate your paddles angle. First the additional weight helps balance the paddles while setting up pitch and second the flat upper surface of the paddle gauge will allow you to eye ball from one side of the heli to confirm that both flybar paddles are on the same horizon. Highly recommended.
8.95
PART#KSJ624
- Quantity: Two per package
Blade Tracking tape (6)
For All RC Helis. Any Size Heli.
A pack of blade tracking tape. Use the tape to diagnose which blade is out of track. Apply a small piece to the lighter blade to achieve perfect equal balance between the main. Balanced and tracked blades is key to a well flying machine.
3.95
PART#KSJ836
Kyosho Colored Tracking Tape
For All RC Helis. Any Size Heli.
Kyosho is known for high quality products. This kit comes with two tracking tapes ( red and orange ) so you may easily distinguish between the high and low running blade ( out of track ). The red tape comes with the Kyosho logo and include a string adhesive which will last a long time.